WIP Part 6: Bandai MG 1/100 Tallgeese EW: Parts Preparation

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 7 | Part 8 |

Now that I am done with the dry brushing. Next is to prepare the parts I need to Panel Wash.

Body Unit Parts

WIP Part 5: Bandai MG 1/100 Tallgeese EW: Inner Frames Dry Brushing

Part 1 | Part 2 | Part 3 | Part 4 | Part 6 | Part 7 | Part 8 |

Now here is the finished dry brushed inner frames. I took pictures and compared it before and after.

Body Unit 

WIP Part 4: Bandai MG 1/100 Tallgeese EW: Inner Frames Articulation Review

Part 1 | Part 2 | Part 3 | Part 5 | Part 6 | Part 7 | Part 8 |

As I've said, before I proceed in Dry Brushing the Inner Frames I will be doing a bit of Articulation review first. 

This Inner Frame is way different from my other Wing EW Kits.

WIP Part 3: Bandai MG 1/100 Tallgeese EW: Inner Frame Assemble

Part 1 | Part 2 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 |

So here is the Inner Frame assemble. Basically, what I built here are those inner frames composed of the Gray Parts. But for this Kit, some inner frame parts are not in the Dark Gray color so this might lack of parts in terms of complete inner frame structures. 

Body Unit Parts

Body Unit Built

WIP Part 2: Bandai MG 1/100 Tallgeese EW: Manual Preview

Part 1 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 |

Here is the Manual Scans for MG Tallgeese EW. In terms of Manual layout, it has the same with the other MG Wing EW series kits and I liked it a lot that they made them all the same layout.

Cover

WIP Part 1: Bandai MG 1/100 Tallgeese EW: Box Preview & Unboxing

Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 |

Finally, after a few weeks of deciding whether which Kits I want to build next here it is now. I choose MG Tallgeese EW first because I had this for almost a year already and second I got excited with the new Knock-off Kit of Tallgeese III by Dragon Momoko. If I had some spare money, I might want to buy that Knock-off Kit along with the Shenlong Sword and Tallgeese Halberg and Lance (both Knock-off too). So much for that, here is the preview of the box art for MG Tallgeese EW and the Unboxing:

Box Art: Front

WIP Part 8: Bandai MG 1/100 Wing Gundam EW: [Finished]

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 7 |

At last, I finally finished on this WIP. I top coated it with Bosny Flat Clear a few days ago. I rushed it because I have been taking so long in completing this project. I made a risk on spraying it because I know that I might get Frosting and here it is. As you can see most of the parts got frost but not that much. I have retouched it with my weathering master and repanel lines some of the almost removed panel lines because of the frosting. 

Here are some pictures I took today after the final retouch an panel lines:

WIP Part 7: Bandai MG 1/100 Wing Gundam EW: Almost Finished

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 8 |

Here is the complete weathered with markings Wing EW. Only 1 step to finishing this WIP. A flat coat will end this and I might add more weathering on the parts that I think a little bit clean than the other parts. I have pose it like that because I had problem posing it while in the action base holding the Buster Rifle point in front. I can't do the proper way on letting the Bustle Rifle hold onto the hand. I also found out that the left arm keeps on loosing from the shoulder when the shield is installed. After I apply flat coat I will try to fix it so it can hold all the weapons properly. Here are some shots I took on the New Years day.