Wednesday, January 29, 2014

WIP Part 4: Bandai MG 1/100 Tallgeese EW: Inner Frames Articulation Review

Part 1 | Part 2 | Part 3 | Part 5Part 6 | Part 7 | Part 8 |

As I've said, before I proceed in Dry Brushing the Inner Frames I will be doing a bit of Articulation review first. 

This Inner Frame is way different from my other Wing EW Kits.


The arms unit can raise at the maximum of that high.

Normally, the arms will extend that far.

And if you will extend it more further, it can go like this.

It can go far like this side ways.

This is the normal position of the collar.

But it can move back and front like a seesaw.

The body can move right that far.

and can move left that far.

Can move backward this far.

and this far forward.

This is the Backpack inner frames.

By pulling the top portion upward and the bottom portion downward, the boosters will pop out automatically.

Sideways, the backpack can raise that far from the body connection.

and this low.

The backpack can individually rotate from the body connection 360 degrees one at a time.

Before I forget, the arm can bend in 2 points like so.

The side skirts can slightly move sideways that far to the right.

and this far to the left.

The back skirts stay that way in the back.

and can go up enough to show more of the boosters inside it.

It can also move inward to the middle like this.

and outward like this.

The leg unit can go only a bit sideways because of the side skirts connected to it that makes it not go further.

And it can go this far forward.

and this far backward.

The leg can also bend this way not quite a 90 degrees.

The foot can move from the ankle this way

and this way also sideways.

The toe can also move just like with the Deathscythe.

The shield handle can go up that far.

and this far in reverse.

This is the normal position for the Dober Gun.

The front handle can move sideways and the other handle can be pushed forward.

If you push the barrel backward the parts connected inside will also move.

This is when you return the position of the barrel to normal.
Thit is just quick and not so detailed articulation review and lets see if after I finish this WIP I will be doing another review for the completed Tallgeese. That's it for now. Thanks for your time.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...