WIP Part 7: TT Hongli MG 1/100 Zaku II Ver.2.0 Black Tri-Stars Version: Assemble Arms & Legs Unit Armors

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 | Part 8 | Part 9 |

Already done painting the Arms & Legs Unit armors an already assembled it. I had a hard time assembling the parts because some are not that fit to the inner frames. Other parts are like deformed where I need to stretch it out before I can slap on to the other parts. I didn't expect the outcome of the painting to be this good. So far I am satisfied with what I have done to this WIP. Here are some pictures I took in many different views.

WIP Part 6: TT Hongli MG 1/100 Zaku II Ver.2.0 Black Tri-Stars Version: Inner Frames & Weapons Assembled

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 7 | Part 8 | Part 9 |

Just a minor update on what's happening with my Zaku WIP. All painted Inner Frames and Weapons are already assembled. Some parts like the energy packs on the Head, Waist and Legs are not yet painted so it will be assembled later on the WIP. If you have remembered last update, I said to put some detailing on the inner frame but I didn't because the parts are so stiff,. If I put some more paint details, it will just make the parts more stiff and hard to more just like for the pipes and pistons.

I am currently applying the armor parts that I have finished painting on some of the inner frames. I will post more updates later this week if I have time. I think I gonna finish this early as expected. So stay tuned for more. That's it for now. Thanks for your time.

WIP Part 5: TT Hongli MG 1/100 Zaku II Ver.2.0 Black Tri-Stars Version: Done Painting Inner Frame & Weapons

Part 1 | Part 2 | Part 3 | Part 4 | Part 6 | Part 7 | Part 8 | Part 9 |

Hi guys. Just got busy this past few weeks in preparations for the just concluded Philippines Election serving as PCOS technician. Now I'm back for some Gunpla. Here is my latest update to my Zaku WIP. I just finished painting the inner frames and weapons, etc. with Primer Grey and Dark Gray as its final color. The inner frames are full of details and I might do some painting on to it just to show depth on the details.

I also prepared today the right Arm and Leg armor parts for the tomorrows painting session.

I hope I can make this in time for the deadline next month. I will try to update as much as I can but depends on the time. I might lessen the update and focus on the WIP. That's it for now. Thanks for your time.

Review: Banpresto One Piece Film Z DXF The Grandline Men Volume 1 "Monkey D. Luffy"

Character: Monkey D. Luffy

Origin: One Piece Film Z

Manufacturer: Banpresto

Classification: DXF The Grandline Men

Series/Volume: 1

Material: PVC, ABS

Release: December 2012

Dimension: H=16cm W=6.5cm

Box Art: Front | Back

Box Art: Sides

Box Art: Top | Bottom

Review: Banpresto Shinryaku!? Ika Musume DX Figure "Ika Musume"

Character: Ika Musume

Origin: Shinryaku!? Ika Musume

Manufacturer: Banpresto

Classification: DX Figure

Series/Volume: ?

Material: PVC, ABS

Release: February 2012

Dimension: H=17cm

Box Art: Front | Back

Box Art: Sides

Box Art: Top | Same as the bottom

Review: Banpresto Tiger & Bunny DX Figure 1 "Kotetsu T. Kaburagi"

Character: Kotetsu T. Kaburagi

Origin: Tiger & Bunny

Manufacturer: Banpresto

Classification: DX

Series/Volume: 1

Material: PVC, ABS

Release: July 2012

Dimension: H=18cm

Box Art: Front | Back

Box Art: Sides

Box Art: Top | Bottom

Review: Banpresto Hunter X Hunter DX Figure Volume 1 "Gon Freecss"

Character: Gon Freecss

Origin: Hunter X Hunter

Manufacturer: Banpresto

Classification: DX Figure

Series/Volume: 1

Material: PVC, ABS

Release: June 2012

Dimension: H=15cm

Box Art: Front | Back

 

Box Art: Sides

Box Art: Top | Same as Bottom

Review: Banpresto Naruto Shippuden DX Figure Shinobi Relations 1 "Naruto Uzumaki"

Character: Naruto Uzumaki

Origin: Naruto Shippuden

Manufacturer: Banpresto

Classification: DX Figure Shinobi Relations

Series/Volume: 1

Material: PVC, ABS

Release: August 2012

Dimension: H=16cm

Box Art: Front | Back

Box Art: Sides

Box Art: Top | Bottom

How I Create my own Painting Tray

Today, I'll be showing you how I create my own painting tray. I call it painting tray because this is where I put my painted parts for drying. If you are into painting, you might need something that works like this. Before, I used Styrofoam for this but the more you use it the foam will start to worn out because of the holes. Now I am using the one made out of used cardboard box.

This is what I made before, but this limits me for about 40 sticks to put on.
So I decided to redo this and make it a bit bigger.

Package No.21

Got loads of new haul this month of April and this will be the last today. This time I only have 2 new figures acquired. I bought Luffy way back earlier 1st quarter of 2013 and I let my friend hold it for the meantime. And recently, I found Ika Musume and decided to buy it then let it ship along with my Luffy.

The shipping fee is a bit higher since my friend declared the item value for the insurance.

Package No.20

Just got my Exclusive MG Tallgeese II today. I ordered this way back when this Kit pre-order was announced.. I am not that excited about this kit since I it just a redo or should I say a recolor of the recently released MG Tallgeese EW. What's new here is just the coloring and the Head to make it Tallgeese II. Should I say, this is just a collectors Item for me. 

Since this is an Exclusive release and only limited slots are available in a local online store, getting this would be hard after the release. I bought it about a quarter higher from the original price of the MG Tallgeese EW though they are released in the same price of 3,800 Yen.

You might be thinking of this Kit being an EW version. This is not an EW kit version of Tallgeese II. This is the one that came from the TV series. As far as I know, Tallgeese II hasn't yet appeared in the EW Manga so there is no way they will release a Kit ahead of the Manga nor the Anime. And maybe the Tallgeese II in the EW Manga is way different from the TV series, so we might expect another MG Tallgeese II kit in the future for the EW version.

Same as my recetly bought Kits. This was sent via Metrowide Courier Express.

Figure Comparison: Authentic and Bootleg

There are lot of people who doesn't have much knowledge in Figure Collecting. Most of them encounters Bootleg prior to the Authentic one. By that, they are easily convinced that they are collecting the right thing. But I don't say that Bootleg collecting is bad. There are lot of circumstances that they prefer on collecting Bootleg because of a low price compared to the authentic one. 

Now I have gathered a bit of comparisons from members of Pinoy One Piece Figure Collectors who apparently have both Authentic and Bootleg of a same figure. 

Bandai Figuarts Zero One Piece For the New World "Monkey D. Luffy"
Bootleg | Authentic

Review: Banpresto Ao no Exorcist DXF Figure 1 "Rin Okumura"

Character: Rin Okumura

Origin: Ao no Exorcist

Manufacturer: Banpresto

Classification: DXF Figure

Series/Volume: 1

Material: PVC, ABS

Release: December 2012

Dimension: H=16cm

Box Art: Front | Back

Box Art: Sides

Box Art: Bottom | Top

How I manage my collection using MyFigureCollection.net

Just wanna do a quick guide on how to manage your collection using MyFigureCollection.net for those who are new to the site.. This guide is for those who already have their MFC account. If you still haven't registered yet, you can register here: MFC

On the search bar, type the name the figure you are looking for.
Much better if you completely enter the name including the manufacturer and the figure line.
Ex: Banpresto DXF Grandline Men Brook

Review: Banpresto Berserk DXF Figure "Guts"

Character: Guts

Origin: Berserk

Manufacturer: Banpresto

Classification: DXF Figure

Series/Volume: ?

Material: PVC, ABS

Release: December 2012

Dimension: H=16cm

Box Art: Front | Back

Box Art: Sides

WIP Part 4: TT Hongli MG 1/100 Zaku II Ver.2.0 Black Tri-Stars Version: Preparation Inner Frame & Weapons

Part 1 | Part 2 | Part 3 | Part 5 | Part 6 | Part 7 | Part 8 | Part 9 |

Just done with cleaning and sanding the inner frame parts. It took me awhile doing this because almost all of the parts has lot of mold line visible that I have to remove. Some parts do have imperfect molds and its hard to fit while testing it. 

I segregated the parts into 4 containers. They are separated in this sequence [Left Arm, Leg] [Right Arm, Leg] [Weapons] [Head, Torso, Backpack]. 

  

Next stop is preparing each parts for painting. Usually, I will hold them on my Alligator Clips holding sticks. I will try to paint this 1-by-1 because most of the parts if you try to assemble has a lot of hidden portions which you cannot reach while painting. I would prime this first and try to sand a bit if somethings went too rough. I am still thinking on what paints will I use for the main colors and the details. First I was planing to use Bosny Chrome but someone told me that it is an Enamel paint. I don't want to use enamel for now so I might go for Bosny Silver. I still need to finalize it after I finish priming. So that's it for now. Thanks for your time.

Package No.19

Just got another package earlier today. Consist of my new addition to my Anime Main Protagonists Shrine. Got this relatively in a lower price than usual retail price. This was sent via JRS yesterday and I kinda amaze how it got here fast. I payed 350 pesos for the shipping fee which I know it should have been lesser since its only an ordinary cargo. Non the less, the package got here safe and no damage at all. Thanks to the store packaging it went out safely. 

How I modify MG 1/100 Zaku II Ver.2.0 Hands

I already started working on my MG Zaku II, starting off with the Hands. Ver 2.0 gives you a nicely articulated fingers but it is quite limited since you will have 3 joined fingers aside from the thumb and fore finger. So here is a bit of modification I made just to extend the articulation for the 3 joined fingers. 

Originally, you only have 4 points of articulation for the 3 joined fingers.
What will I do is to separated those lower joined fingers connected to the palm.

Commission Part 7: Bandai One Piece Model Kit Going Merry Flying Model

Part 1 | Part 2 | Part 3 | Part 4 | Part 5 | Part 6 |

Working out on the remaining parts of the Ship. All parts are pretty much done in terms of weathering. Everything are detailed to my preferences. 

WIP Part 3: TT Hongli MG 1/100 Zaku II Ver.2.0 Black Tri-Stars Version: Manual Preview

Part 1 | Part 2 | Part 4 | Part 5 | Part 6 | Part 7 | Part 8 | Part 9 |

Before I start the actual WIP. Here is the review of the Manual.